[C.CC USERS] FOUND IT, was Re: Qs re occPlug's "Arduino" target and "Upload Firmware". *apologies; newb*

[cljacobsen at gmail.com]

mmmm... We should look at this. In general it would be really useful
to be able to dump the first little bit of the flash before each
upload to check for a magic #, the version number of the firmware and
probably also the bytecode address. This would turn these kinds of
problems into a helpful dialog box.

However, I need to figure out what has gone wrong here. Is this a
problem with the same constant being defined separately in the source
and in the conf file? If so we should really sort that out, otherwise
that bug will *definitely* bite again.

  Christian

On 24 January 2011 17:05, Michael M. Butler <mmbutler at gmail.com> wrote:
> I compared the arduinouno.conf file to the arduino.conf file.
>
> TVM_BYTECODE_ADDR was set to 0x4F00 for the latter, 0x5000 for the former.
>
> Changed the setting in the arduino.conf file to 0x5000. Reloaded the
> firmware. Recompiled. Uploaded heartbeat.occ.
>
> I am watching the occam pi heartbeat blink as I type this.
>
> M
>
> PS: how firmly-set is that 0x5000 bytecode addr? Can it be nudged at all?
>
> --
> Michael M. Butler  = =  m m b u t l e r  at  g m a i l . c o m
> . . . Just remember, immanentizin' the eschaton is
> . . . . a dern sight easier than /monetizin'/ it. --me
>