[C.CC USERS] FOUND IT, was Re: Qs re occPlug's "Arduino" target and "Upload Firmware". *apologies; newb*

[Michael M. Butler]

I compared the arduinouno.conf file to the arduino.conf file.

TVM_BYTECODE_ADDR was set to 0x4F00 for the latter, 0x5000 for the former.

Changed the setting in the arduino.conf file to 0x5000. Reloaded the
firmware. Recompiled. Uploaded heartbeat.occ.

I am watching the occam pi heartbeat blink as I type this.

M

PS: how firmly-set is that 0x5000 bytecode addr? Can it be nudged at all?

-- 
Michael M. Butler  = =  m m b u t l e r  at  g m a i l . c o m
. . . Just remember, immanentizin' the eschaton is
. . . . a dern sight easier than /monetizin'/ it. --me