[C.CC USERS] ATMEGA1280
Paul Verbeke
paverbeke at gmail.com
Fri Dec 31 16:36:52 GMT 2010
Hi,
I think I found the problem... I started digging through the code and found
the boardmap module. I compared it to the ones that worked and there seems
to be the following missing... Not sure what they are for yet, maybe someone
can enlighten me.
-- {{{
code here
-- }}}
The code did compile, and I downloaded it to the board but it did not seem
to work. I did receive the following message that it appeared to download ok
and verify but at the bottom it said it failed... Not sure why about that.
Perhaps I did not correct the errors properly. Any suggestions?
Thanks,
Paul
Environment: []
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.02s
avrdude.exe: Device signature = 0x1e9703
avrdude.exe: reading input file "ch1.ihex"
avrdude.exe: writing flash (24856 bytes):
Writing | ################################################## | 100% 1.00s
avrdude.exe: 24856 bytes of flash written
avrdude.exe done. Thank you.
Any output from the connected device will appear below
(hit stop to disconnect)
------------------------------------------------------
tvm-arduino: program loading failed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.concurrency.cc/pipermail/users/attachments/20101231/b6159a3f/attachment.htm>
More information about the users
mailing list