[C.CC USERS] Issue uploading firmware to the Arduino Diecimila

Sam Ducksworth sducksworth at gmail.com
Fri Aug 27 05:23:41 BST 2010


I am getting the following error when trying to upload firmware to my
Arduino Diecimila

Uploading Plumbing firmware
Device id: arduino
Using config: /usr/share/tvm-avr/conf/arduino.conf
Command: [/usr/bin/avrdude, -C, /etc/avrdude.conf, -U,
flash:w:/usr/share/tvm-avr/firmware/tvm-avr-atmega328p-16000000.hex:i,
-F, -P, /dev/ttyUSB0, -c, arduino, -p, m328p, -b, 57600]
avrdude: stk500_getsync(): not in sync: resp=0xe0

avrdude done.  Thank you.

firmware upload exited with error code: 1

I am able to program it using the native Arduino IDE. Any ideas?

Thanks,

--samd




More information about the users mailing list