[C.CC USERS] new problem

[Omer Kilic]

Aaron Ryan wrote the following on/at 25/04/2010 03:30:
> Thanks.  So having exited with those errors should I just assume that 
> "make" has completed and to move on to "make install"...or should I 
> re-configure with raster graphics disabled?

Just proceed with a `make install` and after that you are a minute away 
from seeing blinkenlights on your Arduino ;)


Cheers,
Omer.


> On Sat, Apr 24, 2010 at 7:28 PM, Omer Kilic <omer at concurrency.cc> wrote:
> 
> 
>     Hey Aaron,
> 
>     Aaron Ryan wrote the following on/at 25/04/2010 03:24:
> 
>         ok...snag!
> 
>         Here's some my make log that shows problems when graphics:
> 
> 
>     AFAIK, you can safely ignore those as the Arduino port does not
>     support graphics...
> 
> 
>     Cheers,
>     Omer.
> 
> 
>         On Sat, Apr 24, 2010 at 4:36 PM, Matt Jadud <jadudm at gmail.com
>         <mailto:jadudm at gmail.com> <mailto:jadudm at gmail.com
>         <mailto:jadudm at gmail.com>>> wrote:
> 
>            On Sat, Apr 24, 2010 at 7:20 PM, Aaron Ryan
>         <amrphoto1 at gmail.com <mailto:amrphoto1 at gmail.com>
>            <mailto:amrphoto1 at gmail.com <mailto:amrphoto1 at gmail.com>>> wrote:
>             > This conversation regarding installation of the
>            Transterpreter/KROC on Linux
>             > with the intent of programming the Arduino, is great!  Can
>         anyone
>            with more
>             > knowledge please post the basic steps i.e. which libs and
>         plugins are
>             > necessary? Does it only run in a virtual environment, if
>         so which
>            one?
>             >
>             > Any help in beginning to get this running on my Ubuntu machine
>            would be
>             > awesome.
> 
>            So.
> 
>            I have a binary bundle you can drop into /opt. I built it not
>         too long
>            ago, and it might work in most cases. (There are possible
>            problems...). Would it be good to hook the two of you up with
>         that to
>            get you rolling, or would you like to see the build process
>         through to
>            completion? (Dennis, I know you've fought long and hard, and
>         really,
>            once you replace the autoconf problem, all is good.)
> 
>            Cheers,
>            Matt
> 
> 
>